|
Craggy Aero Ultimate in full sun.
Notice the shade line across the Panel, this clearly shows the
pilots perspective between shade and full sun on the display. Glare can be
seen on the altimeter but not the Ultimate. Notice
the deep rich colors and True VGA 640 X 480 display.
|
NO Touch Screen Overlay and Craggy's proprietary display
drastically Improves Sunlight readability. Even with full sun on
the screen the Ultimate screen is as readable as in shade.
The handheld ball track mouse allows you to effectively
control the software program even in turbulence without having to pick at
the screen with a wand.
One of the largest manufactures of LCD display states that
if you want to ruin a display for sunlight readability offer it with a touch
screen.
Even the best touch screen overlays typically wash out the
display and produce lots of glare from sun reflection.
|
|
Craggy Aero Ultimate & SeeYou Mobile
Comparison vs Ipaq 310 & Ipaq 4700 on an overcast day with sun from
the rear. The more sun you get the better the Ultimate looks. |
Advantages:
-
Processing Power to run "State of the Art" Software
Screen Shots SeeYou Mobile
Screen Shots WinPilot
Compatible
Hardware
- CAI 302
(CAI Utility to setup the
302 & transfer data runs on the Ultimate)
- Borgelt B500
- LX 166
- LX1600
- Flarm
- Any Flight Recorder or GPS
|
|
MicroTrack Handheld Trackball Mouse
This device is extremely easy to use with either hand.
Or
USB TouchPad Input device
The Ergonomic Touchpad does everything
your mouse does, left click, right click, Scroll!, drag & drop, zoom, glide
extend and much more. It's low profile ergonomic design means less hand
movement and more comfort. It comes with a special Velcro backed housing
that make it “ten touchpads in one!” Specifications
Length: 65.00 mm (2.560 inches) Width: 49.00 mm (1.930 inches)
Thickness without foam pad
|
Ultimate Specifications:
- High Performance Embedded Technology 806 MHz Processor
- Sunlight readable screen 6.5" Diagonal VGA 640 X 480 resolution,
4 times the resolution of the competition.
- 1800 nits brightness at full adjustable by
Potentiometer
- Input Device MicroTrack handheld trackball or TouchPad
- Compatible with CAI 302 , Borgelt B500, LX1600, LX166 or GPS
- WinPilot ADV, PRO Software or SeeYou Mobile
- Power draw 400 mA to 1500 mA depending on the
backlight setting. ( Ipaq 4700 draws 500 mA at full backlight). At
lower backlight settings the colors are not as bright but are deeper and
are still fully visible.
- No exposed wiring board on the back of the instrument.
Connectors include DB9 serial input and /or power for a serial GPS,
DB15 power and Potentiometer, 3.5 mm speaker socket, USB for input
device, and USB for panel mount USB flash drive socket.
- Temperature Range - 45C - 85C
- Internal RFI filtering
- +13 Volt Max Voltage.
System Includes:
- Craggy Ultimate Display & Imbedded Computer
- Hand held Input Ball Track Mouse or TouchPad
- SeeYou Mobile or
- WinPilot ADV or PRO Software,
- Display Brightness Potentiometer
- Panel Mount USB Port
- Wiring to connect hardware, Vario, GPS, Flight Recorder
- Speaker
- 1 GIG Internal Flash Memory
Optional Upgrades
- Optional 4 GIG or 8 GIG CF Memory (not required)
- Optional GARMIN GPS18
|
|
Side Ram Mount with 5" arm, 1" ball diamond
plates |
Back Ram Mount with 5" arm, 1" ball diamond
plates
Notice no messy installation boards and associated RFI ! |
