TT22/TN72 Settings

Trig TT22 -TN72-GPS Antenna (puck not TSO)

Software required TC20 SW 1.12, TT22/21 SW 2.10, FPGA v1.2 or higher

If you setup a Standard Airworthiness Glider with TN72 TABS you can not fly in Class A, B, or C airspace, but you will be seen.

To enter Installation Setup and Test - Push Function and turn on TT22 to get to Setup mode

Menu Items	Settings available	Experimental Airworthiness Certificate Glider	Standard Airworthiness Certificate Glider
Menu Items	Settings available	2020 Compliant	TABS/TSO-C199
VFR ID N Number		NXXXX	NXXXX
ICAO CODE		XXXXXX	XXXXXX
VFR Squawk Code		1202	1202
Airspeed Category		75 kt - 150 kt	75 kt - 150 kt
Aircraft Category		Glider/Sailplane	Glider/Sailplane
Squat Switch/Airspeed switch	For 2020 comp install pitot	"Low when airborne" shows xponder mode GND when on Gound" Make sure to adjust your airspeed switch to the proper speed!	"Low when airborne" shows xponder mode GND when on Gound" Make sure to adjust your airspeed switch to the proper speed!
Squat Switch/Airspeed switch	squat switch
TIS Output		None	None
GPS Input	Free Flight/Next Nav	Trig TN72 SIL 3	C199-TABS
	NMEA183
	Aviation Format
	C199-TABS
	TRIG ADS B
	TRIG TN72 Sil 3
	Garmin ADS B
GPS/TIS Line speed		9600	9600
GPS Cert Level	Uncertified	C	NONE?
	B
	C
	D
GPS NAV Velocity	Unknown/ 10 m/sec/ 3 m/sec	10 m/sec	10 m/sec
Aircraft length		8m	8m
Aircraft Width		15m	15m
GPS Antenna Offset	Unknown/ Auto set by GPS	0m	0m
GPS Antenna Offset	Manual set here	0m	0m
1090 MHz Reciever	Yes if you have PowerFlarm witj ADS-B In option (most USA users), or another 1090ES In receiver (like a Stratus 2 or Statux receiver)	YES	YES
UAT Receiver	No for most gliders. If you have a UAT In receiver (like a Stratus 2 or Statux receiver) set YES	NO	NO

TT22/TN72 Menu setup Items