S10
Finish
Size And Weight
- Height: 61 mm
- Width: 61 mm
- Depth: 70 mm
- Weight: ~345 g
Flight Recorder
- IGC Flight Recorder. High-level IGC specification
- 2048-bit digital signature
- The high-level, Integrated, IGC approved flight recorder can also detect JET and electro engines if a MOP module is present
Backup Battery (3h). SD Card. GPS Module. Bluetooth.
- SD card socket
- 56 channel GPS module
- backup battery sufficient for up to 3hrs
- Bluetooth compatible with iOS and Android or Oudie
Built-in Bluetooth, GPS,
- The S10x series comes with built-in GPS and Bluetooth modules.
- Integrated Bluetooth is for wireless connectivity with your Smartphone or Oudie.
Durability
- Built-in Battery which serves up to 3h of operation
Flight Storage
- Unlimited storage for flights (+28000 hours at 1 sec interval)
- Flights stored in IGC file format are downloadable through Bluetooth
Navigation
- Modes
- Info
- Flarm
- Thermal Assistant
- Waypoint
- Task
- Setup
Final Glide
- Final glide indication
- MC setting
- Ballast setting
- Bugs setting
- Polar selection
Flarm
- Radar
- Indication
- Objects on the map
- Warnings
- Sound warnings
- FlarmNET support
Additional
- Logbook
- AHRS (AHRS activation with a CODE – no need of for any hardware upgrade)
- Remote stick (CAN)
- Compass module (not supported yet – under development)
- MOP sensor (not supported yet – under development)
- S8xD/S10xD repeater unit
- Oudie
- Nano/Nano3/Nano4
- FLAP sensor
Airspace
- Airspace Display
- CUB compatible or from LXNAV database
Navboxes
- 4 configurable (navboxes) values
- 3 configurable (navboxes) values on map screen
Speaker
- External speaker with adjustable volume
- Smooth audio output
- Audio equalizer
- Integrated synthesized speech output
- Audible thermal assistant
Chip
|
Display
- 3.5-inch sunlight readable
- 16 bit color display
- 1200 cd brightness
- 320-pixel-by-240-pixel resolution
- ALS – ambient light sensor
AHRS. Inertial Platform.
- 3 pneumatic sensors which provide Electronic or TE compensation and a built-in inertial platform with +-8g accelerometer and 3 gyroscopes for fast vario measurements and accurate wind calculations.
- The optional AHRS software option enables a graphical artificial horizon page.
- 56-channel uBlox GPS receiver
- High resolution variometer
- High resolution pressure altitude sensor measures up to 16000m (~52500ft)
- Inertial platform 3 axis accelerometer (+-8g) and 3 axis gyroscope
- Advanced engine noise level sensor (also for JET engines)
- Digital temperature compensated pressure sensors for altitude and airspeed
PDA port. Flarm port.
- PDAs or Smartphones can be connected to the system via internal Bluetooth or directly plugged to the PDA port.
- Flarm/PowerFlarm can be connected to a Flarm port.
- 6 digital inputs
- Flarm port input/output on RS232 level (standard IGC 6 pin connector RJ11)
- PDA port input/output on RS232 or TTL level for PDA/PNA devices with 5V power supply (8 pin RJ 45, 5V output max 2A)
- Audio output
- 1Mbit CAN bus for connection for SxxD repeater, Compass module , MOP sensor or Remote stick
- Speed command and Vario priority input and 4 additional user defined inputs
- Bluetooth integrated
FLARM Mode.
- This mode can display all types of FLARM, ADS-B and PCAS objects if external devices are connected.
- FLARM Visual Radar With Audible Warnings.
- The Radar shows all necessary data. The target’s present position, altitude and vertical speed are displayed on the map.
- For each new alert a pop-up appears automatically when a potential collision occurs.
- The system will also trigger a sound and/or voice warning.
Buttons
- 2 x Rotary buttons with push function
- 3 x Push buttons
Storage
- 16 GBytes of internal memory
- Integrated SD card reader
Consumption
- LXNAV S100 at 12V (power input 10-16V)
- 250 mA – minimum brightness without audio
- 340 mA – maximum brightness without audio
- LXNAV S80D at 12V (power input 10-16V)
- 90 mA – minimum brightness without audio
- 140 mA – maximum brightness without audio
Material
- Aluminum housing
